products

99.999% Purity plus specialty gases CO Filled For Silicon - nitride - over - silicon Etch

Basic Information
Place of Origin: China
Brand Name: Newradar Gas
Certification: ISO 9001
Model Number: 40L cylinder
Minimum Order Quantity: 30-50 pcs cylinders
Detail Information
Name: Nitrogen Dioxide , Application: Vehicle Exhaust, Boiler Emissions
Odor: Chlorine Like GHS Signal Word: Danger
Chemical Formula: NO2 Appearance:: Vivid Orange Gas
High Light:

purity plus specialty gases

,

purity cylinder gas


Product Description

Purity 99.999% Carbon Monoxide Gas CO Filled In 40L Cylinder For Silicon-nitride-over-silicon Etch.

carbon monoxide co safety data sheet MSDS.output.p...

Description:

 

1. Carbon monoxide (CO) is a colorless, odorless, and tasteless gas that is slightly less dense than air. It is toxic to hemoglobic animals (including humans) when encountered in concentrations above about 35 ppm, although it is also produced in normal animal metabolism in low quantities, and is thought to have some normal biological functions. In the atmosphere, it is spatially variable and short lived, having a role in the formation of ground-level ozone.

 

2. Carbon monoxide consists of one carbon atom and one oxygen atom, connected by a triple bond that consists of two covalent bonds as well as one dative covalent bond. It is the simplest oxocarbon and is isoelectronic with the cyanide anion, the nitrosonium cation and molecular nitrogen. In coordination complexes the carbon monoxide ligand is called carbonyl.

 

3. Contact with the liquid can cause severe frostbite. Less dense than air. Easily ignited and a flame can flash back to the source of a leak very easily. Burns with a violet flame. Under prolonged exposure to fire or intense heat the containers may rupture violently and rocket. CARBON MONOXIDE is used in organic synthesis, metallurgy, and a fuel.

 

4. Contact of very cold liquefied gas with water may result in vigorous or violent boiling and extremely rapid vaporization. If the water is hot, a liquid "superheat" explosion may occur. Pressures may build to dangerous levels if the liquid contacts water in a closed container [Handling Chemicals Safely 1980]. Reacts explosively with bromine trifluoride at high temperatures or concentrations . The same is true for various oxidizers such as: chlorine dioxide, oxygen (liquid), peroxodisulfuryl difluoride. Reacts with lithium to give lithium carbonyl, which detonates violently with water, igniting the gaseous products. Potassium and sodium metals behave similarly. Cesium oxide, iron(III) oxide, and silver oxide all react, in the presence of moisture, at ambient temperatures with carbon monoxide causing ignition.

 

5. TOXIC; Extremely Hazardous. Inhalation extremely dangerous; may be fatal. Contact with gas or liquefied gas may cause burns, severe injury and/or frostbite. Odorless, will not be detected by sense of smell.

 

6. EXTREMELY FLAMMABLE. May be ignited by heat, sparks or flames. Flame may be invisible. Containers may explode when heated. Vapor explosion and poison hazard indoors, outdoors or in sewers. Vapors from liquefied gas are initially heavier than air and spread along ground. Vapors may travel to source of ignition and flash back. Runoff may create fire or explosion hazard.

 

Specifications:

 

1. Physical properties

 

Physical Constants
Chemical formula CO
Molecular weight 28.010
Specific volume @ +70°F (+21.1°C) 13.81 ft3/lb, 0.86 m3/kg
Flammability range 12.5% to 74.2% in air
Critical pressure 507.47 psia, 34.99 bar
Critical temperature -220.4°F, -140.2°C
Specific gravity @ 70°F, 1 atm (Air=1) 0.967

 

2. Typical technical data (COA)

 

Maximum Impurities
COMPONENTS CONCENTRATION (ppm)
Carbon Dioxide (CO2) <10.0
Hydrogen <1.0
Iron Pentacarbony <0.5
Nickel Tetracarbonyl <1.0
Moisture (H2O) <1.0
Nitrogen (N2) <10.0
Oxygen (O2) <0.5
THC (as Methane) (CH4) <0.5

 

 

 

Cylinder Specifications Contents Pressure
Cylinder Valve Outlet Options SCF Liters PSIG BAR
2A CGA350 DIS724 140 4000 2000 139
4A CGA350 DIS724 28 800 2000 139

 

Applications:

 

1 Carbon Monoxide is used in a variety of applications including silicon-nitride-over-silicon etch to increase selectivity, as a source of oxygen in oxidation.
2. As a source of carbon in certain doping processes. Carbon Monoxide is a colorless, odorless, flammable toxic gas with a TLV of 25 ppm.
3 Carbon Monoxide is stable with respect to decomposition.

 

99.999% Purity plus specialty gases CO Filled For Silicon - nitride - over - silicon Etch 0

Contact Details
Vicky Liu

Phone Number : 86-27-82653381

WhatsApp : +8613667126861