Payment & Shipping Terms:
|Gas:||Asphyxiant Gas||Usage:||Electronic Etchant|
|FilFilling Pressure:||150-200 Bar||Other Names:||(OC-6-11)-Sulfurfluoride|
|Application:||Circuit Breaker,high-voltage Transmission Line, CIS, Large Cable Coil, Mutual Inductor, Lightning Arrester.||Stability::||Stable. Non-flammable. Explodes On Contact With Disilane. Reacts With Sodium.|
Cylinder Packed Electronic Gases , 99.999% SF6 Sulfur Hexafluoride Gas
Sulfur hexafluoride has good electrical insulation properties and excellent arc-extinguishing properties. Its electrical strength is 2.5 times higher than that of the same pressure, 2.5 times of the breakdown voltage air and 100 times of the arc extinguishing capacity. It is a new generation of high voltage dielectric material superior to air and oil.
Sulfur hexafluoride safety and protection
Pure sulfur hexafluoride gas is non-toxic. It can be considered as non-toxic or low-toxic gas in the process of sulfur hexafluoride treatment, and asphyxiant gas at high concentration. Therefore, the site should be well-ventilated.
1. Physical properties
|Standard Package Container||40L/150bar cylinder|
2. Typical technical data (COA)
|Grade Classification||GB/T12022-2006||High Purity|
|Hydrolyze fluoride(As HF) ppm||≤1||≤0.2|
|Mineral oil ppm||≤4||≤1|
|Electrical Industries Circuit Breaker||
leak detection and as a gaseous dielectric for transformers, condensers
As an inert gas
For the casting of magnesium.as an etchant in the semiconductor
|As an inert filling||
Insulated glazing windows.
SF6 is used in the electrical industry as a gaseous dielectric medium for high-voltage circuit breakers, switchgear, and other electrical equipment, often replacing oil filled circuit breakers (OCBs) that can contain harmful PCBs.
SF6 is used to provide a tamponade or plug of a retinal hole in retinal detachment repair operations in the form of a gas bubble.SF6 is used as a contrast agent for ultrasound imaging. Sulfur hexafluoride microbubbles are administered in solution through injection into a peripheral vein.
Sulfur hexafluoride was the tracer gas used in the first roadway air dispersion model calibration; this research program was sponsored by the U.S. Environmental Protection Agency and conducted in Sunnyvale, California on U.S. Highway 101.Sulfur hexafluoride is also routinely used as a tracer gas in laboratory fume hood containment testing.